ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

419 

Chapter 26 DNS

The following table describes the labels in this screen.  

Table 148   System DNS: Add Address Record

FQDN

Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a 

host name and continues all the way up to the top-level domain name. For 

example, www.zyxel.com.tw is a fully qualified domain name, where “www” is the 

host, “zyxel” is the second-level domain, and “com.tw” is the top level domain. 

IP Address

If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports, 

select WAN Interface and select WAN 1 or WAN 2 from the drop-down list box.
If this entry is for the WAN port on a ZyWALL with a single WAN port, select WAN 

Interface.
For entries that are not for the WAN port(s), select Custom and enter the IP 

address of the host in dotted decimal notation.

Enable Wildcard

Select the check box to enable DNS wildcard.

Apply

Click Apply to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.

Click Insert in the System screen to insert a name server record.

Figure 202   System DNS: Insert Name Server Record