ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

497 

Chapter 32 Introducing the SMT

Figure 263   Initial Screen

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.

initialize ch =0, ethernet address: 00:A0:C5:01:23:45
initialize ch =1, ethernet address: 00:A0:C5:01:23:46
initialize ch =2, ethernet address: 00:A0:C5:01:23:47
initialize ch =3, ethernet address: 00:A0:C5:01:23:48
initialize ch =4, ethernet address: 00:00:00:00:00:00
AUX port init . done
Modem init . inactive

Press ENTER to continue...

The login screen appears after you press [ENTER], prompting you to enter the password, as 
shown below.

For your first login, enter the default password “1234”. As you type the password, the screen 
displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your 
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen, 
press [ENTER] to bring up the login screen again.

Figure 264   Password Screen 

Enter Password : XXXX

The SMT is an interface that you use to configure your ZyWALL. 

Several operations that you should be familiar with before you attempt to modify the 
configuration are listed in the table below.

Table 181   Main Menu Commands

Move down to 

another menu

[ENTER]

To move forward to a submenu, type in the number of the desired 

submenu and press [ENTER].

Move up to a 

previous 

menu

[ESC]

Press the [ESC] key to move back to the previous menu.