ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 35 LAN Setup

524

Figure 284   Menu 3.2: TCP/IP and DHCP Ethernet Setup

      Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= Server                      TCP/IP Setup:
Client IP Pool:
  Starting Address= 192.168.1.33  IP Address= 192.168.1.1
  Size of Client IP Pool= 128     IP Subnet Mask= 255.255.255.0
                                  RIP Direction= Both
                                    Version= RIP-1
                                  Multicast= None
                                  Edit IP Alias= No

DHCP Server Address= N/A

                    Press ENTER to Confirm or ESC to Cancel:

Follow the instructions in the next table on how to configure the DHCP fields.

Table 197   Menu 3.2: DHCP Ethernet Setup Fields

DHCP

This field enables/disables the DHCP server.

 

If set to Server, your ZyWALL will act as a DHCP server.

 

If set to None, the DHCP server will be disabled.

 

If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests 

and responses between the remote server and the clients.
When set to Server, the following items need to be set:

Client IP Pool:

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP 

Pool

This field specifies the size, or count of the IP address pool.