ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

627 

Chapter 48 System Maintenance Menus 8 to 10

Figure 388   Budget Management

            Menu 24.9.1 - Budget Management

  Remote Node   Connection Time/Total Budget   Elapsed Time/Total Period

1.WAN_1                  No Budget                  No Budget

2.WAN_2                  No Budget                  No Budget

3.Dial                   No Budget                  No Budget

              Reset Node (0 to update screen):

The total budget is the time limit on the accumulated time for outgoing calls to a remote node. 
When this limit is reached, the call will be dropped and further outgoing calls to that remote 
node will be blocked. After each period, the total budget is reset. The default for the total 
budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the 
accumulated connection time in this menu by entering the index of a remote node. Enter 0 to 
update the screen. The budget and the reset period can be configured in menu 11.1 for the 
remote node. 

Table 234   Budget Management

Remote Node

Enter the index number of the remote node you 

want to reset (just one in this case)

1

Connection Time/

Total Budget

This is the total connection time that has gone by 

(within the allocated budget that you set in menu 

11.1).

5/10 means that 5 minutes 

out of a total allocation of 10 

minutes have lapsed.

Elapsed Time/Total 

Period

The period is the time cycle in hours that the 

allocation budget is reset (see menu 11.1.) The 

elapsed time is the time used up within this 

period.

0.5/1 means that 30 minutes 

out of the 1-hour time period 

has lapsed.

Enter “0” to update the screen or press [ESC] to return to the previous screen.

This is the second option in Menu 24.9 - System Maintenance - Call Control. It displays 
information about past incoming and outgoing calls. Enter 2 from Menu 24.9 - System 
Maintenance - Call Control to bring up the following menu.