ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 50 IP Policy Routing

636

This chapter covers setting and applying policies used for IP routing. This chapter applies to 
the ZyWALL 35 and ZyWALL 70.

Menu 25 shows the summary of a policy rule, including the criteria and the action of a single 
policy, and whether a policy is active or not. Each policy contains two lines. The former part is 
the criteria of the incoming packet and the latter is the action. Between these two parts, 
separator "|" means the action is taken on criteria matched and separator "=" means the action 
is taken on criteria not matched.

Figure 393   Menu 25: Sample IP Routing Policy Summary

                      Menu 25 - IP Routing Policy Summary

 #   A                         Criteria/Action
 --- - -------------------------------------------------------
 001 N SA=1.1.1.1-1.1.1.1 DA=2.2.2.2-2.2.2.5
       SP=20-25 DP=20-25 P=6 T=NM PR=0      |GW=192.168.1.1 T=MT PR=0
 002 N _______________________________________________________
       _______________________________________________________
 003 N _______________________________________________________
       _______________________________________________________
 004 N _______________________________________________________
       _______________________________________________________
 005 N _______________________________________________________
       _______________________________________________________
 006 N _______________________________________________________
       _______________________________________________________

              Select Command= None           Select Rule= N/A
                    Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

The following table describes the fields in this screen.

Table 238   Menu 25: Sample IP Routing Policy Summary 

#

This is the policy index number.

A

This displays whether a policy is active (Y) or not (N).