ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 51 Call Scheduling

646

Once your schedule sets are configured, you must then apply them to the desired remote 
node(s). Enter 11 from the Main Menu and then enter the target remote node index. Press 
[SPACE BAR] and then [ENTER] to select PPPoE in the Encapsulation field to make the 
schedule sets field available as shown next.

Figure 401   Applying Schedule Set(s) to a Remote Node (PPPoE)

              Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe        Route= IP
Active= Yes

Encapsulation= PPPoE           Edit IP= No
Service Type= Standard         Telco Option:
Service Name=                    Allocated Budget(min)= 0
Outgoing=                        Period(hr)= 0
  My Login=                      Schedules= 1,2,3,4
  My Password= ********          Nailed-Up Connection= No
  Authen= CHAP/PAP
                               Session Options:
                                 Edit Filter Sets= No
                                 Idle Timeout(sec)= 100

  

                              
     Press ENTER to Confirm or ESC to Cancel:

You can apply up to four schedule sets, separated by commas, for one remote node. Change 
the schedule set numbers to your preference(s).

Action

Forced On means that the connection is maintained whether or not there is a demand 

call on the line and will persist for the time period specified in the Duration field. 
Forced Down means that the connection is blocked whether or not there is a demand 

call on the line. 
Enable Dial-On-Demand means that this schedule permits a demand call on the line.
Disable Dial-On-Demand means that this schedule prevents a demand call on the line. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.

Table 242   Schedule Set Setup (continued)