ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 2 Introducing the Web Configurator

76

Click the icon in the Show Statistics screen. This screen shows you the line chart of each 
port’s throughput statistics.

Figure 12   Home : Show Statistics: Line Chart

Status

For the LAN and DMZ ports, this displays the port speed and duplex setting. 
For the WAN and Dial Backup ports, this displays the port speed and duplex setting 

if you’re using Ethernet encapsulation and Down (line is down), Idle (line (ppp) idle), 

Dial (starting to trigger a call) or Drop (dropping a call) if you’re using PPPoE 

encapsulation.
For the WLAN port, it displays the transmission rate when a wireless LAN card is 

inserted and WLAN is enabled or Down when a wireless LAN is not inserted or 

WLAN is disabled.

TxPkts

This is the number of transmitted packets on this port.

RxPkts

This is the number of received packets on this port.

Tx B/s

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time

This is the total amount of time the line has been up.

System Up Time This is the total time the ZyWALL has been on.

Poll Interval(s)

Enter the time interval for refreshing statistics in this field.

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval(s) 

field.

Stop

Click Stop to stop refreshing statistics.

Table 7   Home: Show Statistics (continued)