ZyXEL Communications P-6600HW-Tx v3 User Manual

 Chapter 8 LAN Setup

P-660HW-Tx v3 User’s Guide

The following table describes the fields in this screen.  

To edit your ZyXEL Device's advanced LAN settings, click the Advanced Setup button in the 
LAN IP screen. The screen appears as shown.

Figure 78   Advanced LAN Setup

The following table describes the labels in this screen.  

Table 39   LAN IP

TCP/IP

IP Address

Enter the IP address of your ZyXEL Device in dotted decimal notation, for 

example, 192.168.1.1 (factory default). 

IP Subnet Mask 

Type the subnet mask assigned to you by your ISP (if given).

Apply

Click Apply to save your changes to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Advanced Setup

Click this button to display the Advanced LAN Setup screen and edit more 

details of your LAN setup.

Table 40   Advanced LAN Setup

RIP & Multicast 

Setup

RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast

IGMP (Internet Group Management Protocol) is a network-layer protocol used to 

establish membership in a multicast group. The ZyXEL Device supports both IGMP 

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.