ZyXEL Communications P-6600HW-Tx v3 User Manual

Chapter 20 Logs

P-660HW-Tx v3 User’s Guide

An "End of Log" message displays for each mail in which a complete log has been sent. The 
following is an example of a log sent by e-mail.

• You may edit the subject title.
• The date format here is Day-Month-Year.
• The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
• "

End of Log

" message shows that a complete log has been sent.

Log Schedule

This drop-down menu is used to configure the frequency of log messages being 

sent as E-mail: 
•

Daily

•

Weekly

•

Hourly

•

When Log is Full

•

None. 

If you select Weekly or Daily, specify a time of day when the E-mail should be sent. 

If you select Weekly, then also specify which day of the week the E-mail should be 

sent. If you select When Log is Full, an alert is sent when the log fills up. If you 

select None, no log messages are sent. 

Day for Sending 

Log

Use the drop down list box to select which day of the week to send the logs. 

Time for 

Sending Log

Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to 

send the logs. 

Clear log after 

sending mail

Select the checkbox to delete all the logs after the ZyXEL Device sends an E-mail of 

the logs.

Syslog Logging

The ZyXEL Device sends a log to an external syslog server.

Active

Click Active to enable syslog logging. 

Syslog Server 

IP Address

Enter the server name or IP address of the syslog server that will log the selected 

categories of logs. 

Log Facility 

Select a location from the drop down list box. The log facility allows you to log the 

messages to different files in the syslog server. Refer to the syslog server manual 

for more information. 

Active Log and 

Alert

Log

Select the categories of logs that you want to record.

Send Immediate 

Alert 

Select log categories for which you want the ZyXEL Device to send E-mail alerts 

immediately. 

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to return to the previously saved settings.

Table 100   Log Settings