ZyXEL Communications P-660HN-T1H User Manual

Chapter 8 Wireless LAN

P-660HN-T1H User’s Guide

The following table describes the labels in this screen.

In the Network > Wireless LAN > AP screen, select No Security from the 
Security Mode list to allow wireless devices to communicate with the ZyXEL 
Device without any data encryption or authentication.

Table 26   Network > Wireless LAN > AP

Wireless Setup
Enable 
Wireless LAN

Click the check box to activate wireless LAN.

Channel 
Selection

Set the operating channel manually by selecting a channel from the 
Channel Selection list or use Auto Channel Select to have it 
automatically configured.

Common Setup
Network 
Name (SSID)

The SSID (Service Set IDentity) identifies the service set with which a 
wireless device is associated. Wireless devices associating to the access 
point (AP) must have the same SSID. Enter a descriptive name (up to 32 
printable 7-bit ASCII characters) for the wireless LAN. 

Note: If you are configuring the ZyXEL Device from a computer 

connected to the wireless LAN and you change the ZyXEL 
Device’s SSID or WEP settings, you will lose your wireless 
connection when you press Apply to confirm. You must then 
change the wireless settings of your computer to match the 
ZyXEL Device’s new settings.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a 
station cannot obtain the SSID through scanning using a site survey tool.

Security 
Mode

See the following sections for more details about this field.

MAC Filter 

This shows whether the wireless devices with the MAC addresses listed are 
allowed or denied to access the ZyXEL Device using this SSID.

Edit

Click this to go to the MAC Filter screen to configure MAC filter settings. 
See 

 for more details.

QoS

Select this check box to activate Quality of Service (QoS). 

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Advanced 
Setup

Click this to display the Wireless Advanced Setup screen and edit more 
details of your WLAN setup. See 

 for more 

details.