ZyXEL Communications P-660HN-T1H User Manual

 Chapter 17 Universal Plug-and-Play (UPnP)

P-660HN-T1H User’s Guide

Use the following screen to configure the UPnP settings on your ZyXEL Device. 
Click Advanced > UPnP to display the screen shown next.

See 

 for more information. 

Figure 95   Advanced > UPnP > General

The following table describes the fields in this screen. 

Table 69   Advanced > UPnP > General

Active the Universal Plug 
and Play (UPnP) Feature

Select this check box to activate UPnP. Be aware that anyone 
could use a UPnP application to open the web configurator's 
login screen without entering the ZyXEL Device's IP address 
(although you must still enter the password to access the web 
configurator).

Allow users to make 
configuration changes 
through UPnP

Select this check box to allow UPnP-enabled applications to 
automatically configure the ZyXEL Device so that they can 
communicate through the ZyXEL Device, for example by using 
NAT traversal, UPnP applications automatically reserve a NAT 
forwarding port in order to communicate with another UPnP 
enabled device; this eliminates the need to manually configure 
port forwarding for the UPnP enabled application. 

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.