ZyXEL Communications P-660HN-T1H User Manual
Chapter 4 Tutorials
P-660HN-T1H User’s Guide
49
To configure a static route to route traffic from N1 to N2:
1
Log into the ZyXEL Device’s Web Configurator in advanced mode.
2
Click Advanced > Static Route.
3
Click Edit on a new rule in the Static Route screen.
4
Configure the Static Route Setup screen using the following settings:
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination,
N2.
4b
Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4a
Click Apply.
Now B should be able to receive traffic from A. You may need to additionally
configure B’s firewall settings to allow specific traffic to pass through.
configure B’s firewall settings to allow specific traffic to pass through.
R’s N2
192.168.10.2
B
192.168.10.33
Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER
IP ADDRESS