ZyXEL Communications P-660HN-T1H User Manual

Chapter 5 Internet and Wireless Setup Wizard

P-660HN-T1H User’s Guide

If the ZyXEL Device fails to detect your DSL connection type but the physical line 
is connected, enter your Internet access information in the wizard screen exactly 
as your service provider gave it to you. Leave the defaults in any fields for which 
you were not given information.

Figure 14   Internet Access Wizard Setup: ISP Parameters

The following table describes the fields in this screen.

Table 7   Internet Access Wizard Setup: ISP Parameters

Mode

Select Routing (default) from the drop-down list box if your ISP give you 
one IP address only and you want multiple computers to share an Internet 
account. Select Bridge when your ISP provides you more than one IP 
address and you want the connected computers to get individual IP 
address from ISP’s DHCP server directly. If you select Bridge, you cannot 
use Firewall, DHCP server and NAT on the ZyXEL Device.

Encapsulation Select the encapsulation type your ISP uses from the Encapsulation 

drop-down list box. Choices vary depending on what you select in the 
Mode field.  

If you select Bridge in the Mode field, select either PPPoA or RFC 1483. 

If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET 
ENCAP or PPPoE.