ZyXEL Communications P-660HN-T1H User Manual

Chapter 7 LAN Setup

P-660HN-T1H User’s Guide

The following table describes the fields in this screen.  

Use this screen to edit your ZyXEL Device's RIP, multicast and Windows 
Networking settings. Click the Advanced Setup button in the LAN IP screen. The 
screen appears as shown.

Figure 36   Network > LAN > IP: Advanced Setup

The following table describes the labels in this screen.  

Table 21   Network > LAN > IP

IP Address

Enter the LAN IP address you want to assign to your ZyXEL Device in 
dotted decimal notation, for example, 192.168.1.1 (factory default). 

IP Subnet Mask 

Type the subnet mask of your network in dotted decimal notation, for 
example 255.255.255.0 (factory default). Your ZyXEL Device 
automatically computes the subnet mask based on the IP Address you 
enter, so do not change this field unless you are instructed to do so.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Advanced Setup

Click this to display the Advanced LAN Setup screen and edit more 
details of your LAN setup.

Table 22   Network > LAN > IP: Advanced Setup

RIP & Multicast Setup
RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol 
used to establish membership in a multicast group. The ZyXEL Device 
supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable 
it.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.