ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

219 

Chapter 17 Remote Management Screens

3 The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the Prestige will disconnect the session immediately.

4 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

5 There is a firewall rule that blocks it.

When NAT is enabled:

• Use the Prestige’s WAN IP address when configuring from the WAN. 
• Use the Prestige’s LAN IP address when configuring from the LAN.

There is a default system management idle timeout of five minutes (three hundred seconds). 
The Prestige automatically logs you out if the management session remains idle for longer 
than this timeout period. The management session does not time out when a statistics screen is 
polling. You can change the timeout period in the System screen

To change your Prestige’s World Wide Web settings, click the Remote MGMT link under 
Management to display the WWW screen.

Figure 119   WWW Remote Management

The following table describes the labels in this screen.

Table 89   WWW Remote Management

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the Prestige using 

this service.