ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

Chapter 17 Remote Management Screens

222

Figure 122   FTP Remote Management

The following table describes the labels in this screen.

Table 91   FTP Remote Management

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the Prestige using 

this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

Prestige using this service. 
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the Prestige using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your Prestige supports SNMP agent functionality, which allows a manager 
station to manage and monitor the Prestige through the network. The Prestige supports SNMP 
version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP 
management operation.

Note: SNMP is only available if TCP/IP is configured.