ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

73 

Chapter 3 Connection Wizard

You can configure the WAN port's MAC address by either using the factory default or cloning 
the MAC address from a computer on your LAN. Once it is successfully configured, the 
address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless 
you change the setting or upload a different "rom" file.

Table 22   Example of Network Properties for LAN Servers with Fixed IP Addresses

Choose an IP address

192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.

Subnet mask 

255.255.255.0

Gateway (or default route)

192.168.1.1(Prestige LAN IP)

This screen allows users to configure the WAN port's MAC address by either using the factory 
default or cloning the MAC address from a computer on your LAN.

Figure 30   WAN MAC Address

The following table describes the fields in this screen.

Table 23   WAN MAC Address

Factory Default

Select Factory Default to use the factory assigned default MAC address.  

Spoof this 

computer’s MAC 

address

Select this option and enter the IP address of the computer on the LAN whose 

MAC you are cloning. Once it is successfully configured, the address will be 

copied to the rom file (ZyNOS configuration file). It will not change unless you 

change the setting or upload a different rom file. It is advisable to clone the MAC 

address from a computer on your LAN even if your ISP does not presently 

require MAC address authentication.

Back

Click Back to return to the previous screen.

Next

Click Next to continue. 

Follow the on-screen instructions and click Apply to complete the wizard setup and save your 
configuration.