ZyXEL Communications P-335WT User Manual

P-335 Series User’s Guide

85 

Chapter 5 Wireless LAN (P-335WT)

Figure 37   Wireless 

The following table describes the general wireless LAN labels in this screen.

Table 29   Wireless

Enable 

Wireless LAN

Click the check box to activate wireless LAN.

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Note: If you are configuring the Prestige from a computer connected 
to the wireless LAN and you change the Prestige’s SSID or WEP 
settings, you will lose your wireless connection when you press Apply 
to confirm. You must then change the wireless settings of your 
computer to match the Prestige’s new settings.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through passive scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. 
Refer to the Connection Wizard chapter for more information on channels.

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to reload the previous configuration for this screen.

See the rest of this chapter for information on the other labels in this screen. 

Select No Security to allow wireless stations to communicate with the access points without 
any data encryption.