ZyXEL Communications 100 Series User Manual
Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
134
6.3.3 How to Set Up the Wireless Clients to Use the WLAN Interface
The following sections show you how to have a wireless client (not included with the
ZyWALL) use the wireless network.
ZyWALL) use the wireless network.
6.3.3.1 How to Configure the ZyXEL Wireless Client Utility
This example shows how to configure ZyXEL’s wireless client utility (not included with the
ZyWALL) to use the WLAN interface. See
ZyWALL) to use the WLAN interface. See
Section 6.3.3.2 on page 137
instead for how to use
Funk Odyssey’s wireless client software if you want the wireless client to validate the
ZyWALL’s certificate (for added protection against connecting to a rogue AP).
ZyWALL’s certificate (for added protection against connecting to a rogue AP).
1 Open the wireless client utility and click Profile.
Figure 57 ZyXEL Wireless Client
2 Add a new profile. This example uses “ZYXEL_WPA” as the name. It is also the SSID
(name) of the wireless network. Select Infrastructure and click Next.