ZyXEL Communications 100 Series User Manual

 Chapter 7 Status

ZyWALL USG 100/200 Series User’s Guide

The following table describes the labels in this screen. 

Use this screen to look at a line graph of packet statistics for each physical port. To access this 
screen, click Port Statistics in the Status screen and then the Switch to Graphic View 
Button.

Table 38   Status > Port Statistics

Switch to 
Graphic View

Click this to display the port statistics as a line graph.

Port

This field displays the physical port number.

Status

This field displays the current status of the physical port. 
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed 
and duplex setting (Full or Half).

TxPkts

This field displays the number of packets transmitted from the ZyWALL on the 
physical port since it was last connected.

RxPkts

This field displays the number of packets received by the ZyWALL on the physical 
port since it was last connected.

Collisions

This field displays the number of collisions on the physical port since it was last 
connected.

Tx B/s

This field displays the transmission speed, in bytes per second, on the physical port 
in the one-second interval before the screen updated.

Rx B/s

This field displays the reception speed, in bytes per second, on the physical port in 
the one-second interval before the screen updated.

Up Time

This field displays how long the physical port has been connected.

System Up Time

This field displays how long the ZyWALL has been running since it last restarted or 
was turned on.

Poll Interval

Enter how often you want this window to be updated automatically, and click Set 
Interval.

Set Interval

Click this to set the Poll Interval the screen uses.

Stop

Click this to stop the window from updating automatically. You can start it again by 
setting the Poll Interval and clicking Set Interval.