ZyXEL Communications 100 Series User Manual

Chapter 10 Interface

ZyWALL USG 100/200 Series User’s Guide

Figure 158   Interface Wizard: Summary WAN (PPTP Shown)      

The following table describes the labels in this screen. 

Table 58   Interface Wizard: Summary WAN

Encapsulation

This displays what encapsulation this interface uses to connect to the Internet.

Base Interface

This field only appears for a PPTP interface. It displays the identity of the Ethernet 
interface for connecting with a modem or router. 

Base IP Address

This field only appears for a PPTP interface. It displays the (static) IP address 
assigned to you by your ISP.

IP Subnet Mask

This field only appears for a PPTP interface. It displays the  subnet mask assigned 
to you by your ISP (if you entered one).

Server IP

This field only appears for a PPTP interface. It displays the IP address of the PPTP 
server.

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -
_

@$./

 characters, and it can be up to 31 characters long. 

Nailed-Up Select 

Nailed-Up if you do not want the connection to time out.

Idle Timeout

Type the time in seconds that elapses before the router automatically disconnects 
from the PPPoE server. 0 means no timeout.

WAN Interface

This displays the identity of the interface you configure to connect with your ISP.

Zone

This field displays to which security zone this interface and Internet connection will 
belong.

IP Address 
Assignment

This field displays whether the WAN IP address is static or dynamic (Auto).

First DNS Server
Second DNS 
Server

If the IP Address Assignment is Static, these fields display the DNS server IP 
address(es).

Add this interface 
to WAN_TRUNK 
for WAN load 
balance.

This shows whether or not the interface is part of the default WAN trunk for load 
balancing.

OK

Click OK to close the screen.