ZyXEL Communications 100 Series User Manual

 Chapter 10 Interface

ZyWALL USG 100/200 Series User’s Guide

A Virtual Local Area Network (VLAN) divides a physical network into multiple logical 
networks. The standard is defined in IEEE 802.1q.

Figure 175   Example: Before VLAN

In this example, there are two physical networks and three departments A, B, and C. The 
physical networks are connected to hubs, and the hubs are connected to the router.

Alternatively, you can divide the physical networks into three VLANs.

MAC 
Address

This displays the MAC address (in XX:XX:XX:XX:XX:XX format) of a connected 
wireless station. 

Strength

This displays the strength of the wireless client’s radio signal. The signal strength mainly 
depends on the antenna output power and the wireless client’s distance from the 
ZyWALL. 

Connect 
Rate

This displays what data transfer rate of the wireless client’s connection to the ZyWALL. 
This field displays up to the standard IEEE 802.11g connection rate of 54 Mbps. It does 
not display higher, even if you enable super mode. The display on your wireless clients 
may vary.

Interface

This is the name of the wireless LAN interface on the ZyWALL to which the wireless 
client is connected.

Table 73   Network > Interface > WLAN > Station Monitor