ZyXEL Communications 100 Series User Manual

Chapter 21 SSL VPN

ZyWALL USG 100/200 Series User’s Guide

Follow the steps below to upload a custom logo to display on the remote user SSL VPN 
screens. 

1 Click VPN > SSL VPN and click the Global Setting tab to display the configuration 

screen. 

2 Click Browse to locate the logo graphic. Make sure the file is in GIF, JPG, or PNG 

format. 

3 Click Apply to start the file transfer process. 
4 Log in as a user to verify that the new logo displays properly. 

The following shows an example logo on the remote user screen. 

Figure 273   Example Logo Graphic Display 

After you have configured the SSL VPN settings on the ZyWALL, follow the steps below to 
establish an SSL VPN connection. 

1 Display the login screen and enter your user account information (the user name and 

password). 

2 Select Login to SSL VPN. 
3 Click Login. 
4 SSL VPN connection starts. This may take several minutes depending on your network 

connection. Once the connection is up, you should see the client portal screen. The 
following shows an example.