ZyXEL Communications 100 Series User Manual

Chapter 30 ADP

ZyWALL USG 100/200 Series User’s Guide

The following table describes the screens in this screen. 

Use this screen to:

• Create a new profile using an existing base profile

• Edit an existing profile

• Delete an existing profile

The ZyWALL comes with base profiles. You use base profiles to create new profiles.

Figure 398   Base Profiles

Table 165   Anti-X > ADP > General > Add 

Enable

Select this check box to turn on this anomaly profile to traffic direction policy.

From

Traffic direction is defined by the zone the traffic is coming from and the zone 
the traffic is going to.
Use the From field to specify the zone from which the traffic is coming.
Select ZyWALL to specify traffic coming from the ZyWALL itself.

To

Use the To field to specify the zone to which the traffic is going.
Select ZyWALL to specify traffic destined for the ZyWALL itself.
From LAN1 To LAN1 means packets traveling from a computer on one LAN 
subnet to a computer on another LAN subnet via the ZyWALL’s LAN zone 
interfaces. The ZyWALL does not check packets traveling from a LAN 
computer to another LAN computer on the same subnet.
From WAN To WAN means packets that come in from the WAN zone and the 
ZyWALL routes back out through the WAN zone.

ADP Profile

An ADP profile is a set of ADP rules with configured activation, log and action 
settings. Select an ADP profile to apply to the entry’s traffic direction. Configure 
the ADP profiles in the ADP profile screens. 

OK

Click OK to save your changes. 

Cancel

Click Cancel to exit this screen without saving your changes.