ZyXEL Communications 100 Series User Manual

Chapter 43 System

ZyWALL USG 100/200 Series User’s Guide

This section shows you how to set the console port speed when you connect to the ZyWALL 
via the console port using a terminal emulation program. See 

console port settings.

Click System > Console Speed to open the Console Speed screen.

Figure 489   System > Console Speed

The following table describes the labels in this screen. 

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address 
and vice versa. The DNS server is extremely important because without it, you must know the 
IP address of a machine before you can access it. 

The ZyWALL can get the DNS server addresses in the following ways.

• The ISP tells you the DNS server addresses, usually in the form of an information sheet, 

when you sign up. If your ISP gives you DNS server addresses, manually enter them in the 
DNS server fields.

• If your ISP dynamically assigns the DNS server IP addresses (along with the ZyWALL’s 

WAN IP address), set the DNS server fields to get the DNS server address from the ISP. 

• You can manually enter the IP addresses of other DNS servers.

Table 232   System > Console Speed

Console Port 
Speed

Use the drop-down list box to change the speed of the console port. Your 
ZyWALL supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the 
console port.
The Console Port Speed applies to a console port connection using terminal 
emulation software and NOT the Console in the ZyWALL web configurator 
Status screen. 

Apply

Click Apply to save your changes back to the ZyWALL. 

Reset

Click Reset to begin configuring this screen afresh.