ZyXEL Communications 1001H User Manual

11-2

The first selection, System Status, gives you information on the status and statistics of the ports, as shown
below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ISDN telephone line status, number of packets sent and number of packets received.

To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu,
select number 1, System Status. There are five commands in Menu 24.1 - System Maintenance -
Status

. Entering 1 disconnects the current B1 channel call; 2 disconnects the current B2 channel call, 3

resets the counters, 4 drops both B1 and B2 and ESC takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

The following table describes the fields present in Menu 24.1 - System Maintenance - Status.

Chan

Shows statistics for B1 and B2 channels respectively. This is the
information displayed for each channel:

Link

Shows the name of the remote node or the user the channel is
currently connected to or the status of the channel (Down, Idle,
Calling or Answering).

Menu 24.1 -- System Maintenance – Status

Chan

--
--

Link
Down
Down

Type
0Kbps
0Kbps

TXPkts

0
0

RXPkts

0
0

Errors

0
0

CLU

0%
0%

ALU

0%
0%

Up Time
0:00:00
0:00:00

Total Outcall Time:

0:00:00

Ethernet:

Status: 10M/Half Duplex
TX Pkts: 230
RX Pkts: 0
Collisions: 0

WAN:
  Chan 1 IP Addr:
  Chan 2 IP Addr:
  Chan 1 CLID:
  Chan 2 CLID:

LAN Packet Which Triggered Last Call:

Press Command:

COMMANDS: 1-Drop B1  2-Drop B2  3-Reset Counters  4-Drop All    ESC-Exit