ZyXEL Communications 1001H User Manual

P100IH ISDN Router

System Maintenance

11-19

11.7 Command Interpreter Mode

This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e-
mail to the ZyXEL Support Group.

Figure 11-22 Command mode

11.8 Call Control

The Prestige provides four call control functions: call control parameters, blacklist, budget management and
call history.

Call control parameters allow you to set a dial out time limit, the number of times a number should be
called before it is added to the blacklist and the interim between calls.

The budget management function allows you to set a limit on the total outgoing call time of the Prestige
over a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped
and any future outgoing calls will be blocked.

The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of
phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the
Prestige tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1),
then the phone number is put in the blacklist. You will have to enable the number manually before the
Prestige will dial that number again.

Call history chronicles preceding incoming and outgoing calls.

Enter Menu Selection Number: 8