ZyXEL Communications ZyXEL G-560 User Manual

ZyXEL G-560 User’s Guide

76 

Chapter 6 Wireless Screens

Select WPA-PSK, WPA2-PSK or WPA-PSK/WPA2-PSK/Mixed in the Encryption 
Method drop down list-box to display the screen displays as next.

Figure 43   Wireless Security: WPA-PSK

Passphrase

Enter a “passphrase” (password phrase) of up to 32 case-sensitive printable 

characters and click Generate to have the G-560 create four different WEP keys.

Generate

After you enter the passphrase, click Generate to have the G-560 generates four 

different WEP keys automatically.

ASCII

Select this option to enter ASCII characters as the WEP keys. 

Hex

Select this option to enter hexadecimal characters as the WEP keys.

Key 1 to 
Key 4

If you want to manually set the WEP keys, select ASCII or Hex WEP key input 

method and enter the WEP key in the field provided.
Select a WEP key to use for data encryption.
The WEP keys are used to encrypt data. Both the G-560 and the wireless stations 

must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal 

characters ("0-9", "A-F"). 
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal 

characters ("0-9", "A-F").  
If you chose 256-bit WEP, then enter 29 ASCII characters or 58 hexadecimal 

characters ("0-9", "A-F").

Apply

Click Apply to save your changes back to the G-560.

Reset

Click Reset to begin configuring this screen afresh.

Table 15   Wireless Security: WEP