ZyXEL Communications 1000 User Manual

 Chapter 9 Dashboard

ZyWALL USG 1000 User’s Guide

The following front and rear panel labels display when you hover your 
cursor over a connected interface or slot.

Name

This field displays the name of each interface. 

Slot

This field displays the name of each extension slot. 

Device

This field displays the name of the device connected to the extension slot 
(or none if no device is detected).

Status

This field displays the current status of each interface or device installed 
in a slot. The possible values depend on what type of interface it is.

For Ethernet interfaces:

Inactive - The Ethernet interface is disabled.

Down - The Ethernet interface is enabled but not connected.

Speed / Duplex - The Ethernet interface is enabled and connected. 
This field displays the port speed and duplex setting (Full or Half).

For cellular (3G) interfaces, see 

 for the status 

that can appear. 

For the auxiliary interface:

Inactive - The auxiliary interface is disabled.

Connected - The auxiliary interface is enabled and connected. 

Disconnected - The auxiliary interface is not connected. 

HA Status

This field displays the status of the interface in the virtual router.

Active - This interface is the master interface in the virtual router.

Stand-By - This interface is a backup interface in the virtual router.

Fault - This VRRP group is not functioning in the virtual router right now. 
For example, this might happen if the interface is down. 

n/a - Device HA is not active on the interface.

Zone

This field displays the zone to which the interface is currently assigned.

IP Address/

Mask

This field displays the current IP address and subnet mask assigned to 
the interface. If the interface is a member of an active virtual router, this 
field displays the IP address it is currently using. This is either the static 
IP address of the interface (if it is the master) or the management IP 
address (if it is a backup).

Device

This identifies a device installed in one of the ZyWALL’s extension slots 
or USB ports.  

Device 
Information

System 

Name

This field displays the name used to identify the ZyWALL on any 
network. Click the icon to open the screen where you can change it. See 

Table 21   Dashboard (continued)