ZyXEL Communications 1000 User Manual

Chapter 9 Dashboard

ZyWALL USG 1000 User’s Guide

The following table describes the labels in this screen. 

Use this screen to look at a list of the users currently logged into the ZyWALL. To 
access this screen, click the dashboard’s Number of Login Users icon.

Figure 214   Dashboard > Number of Login Users

Table 26   Dashboard > DHCP Table

#

This field is a sequential value, and it is not associated with a specific 
entry.

Interface

This field identifies the interface that assigned an IP address to a DHCP 
client.

IP Address

This field displays the IP address currently assigned to a DHCP client or 
reserved for a specific MAC address. Click the column’s heading cell to 
sort the table entries by IP address. Click the heading cell again to 
reverse the sort order.

Host Name

This field displays the name used to identify this device on the network 
(the computer name). The ZyWALL learns these from the DHCP client 
requests. “None” shows here for a static DHCP entry.

MAC Address

This field displays the MAC address to which the IP address is currently 
assigned or for which the IP address is reserved. Click the column’s 
heading cell to sort the table entries by MAC address. Click the heading 
cell again to reverse the sort order.

Description

For a static DHCP entry, the host name or the description you configured 
shows here. This field is blank for dynamic DHCP entries.

Reserve

If this field is selected, this entry is a static DHCP entry. The IP address 
is reserved for the MAC address.

If this field is clear, this entry is a dynamic DHCP entry. The IP address is 
assigned to a DHCP client.

To create a static DHCP entry using an existing dynamic DHCP entry, 
select this field, and then click Apply.

To remove a static DHCP entry, clear this field, and then click Apply.