ZyXEL Communications 1000 User Manual
Chapter 13 Interfaces
ZyWALL USG 1000 User’s Guide
303
The following table describes the labels in this screen.
Table 65 Configuration > Network > Interface > Cellular > Add
LABEL
DESCRIPTION
Show Advance
Settings / Hide
Advance Settings
Settings / Hide
Advance Settings
Click this button to display a greater or lesser number of configuration
fields.
fields.
General Settings
Enable
Interface
Select this option to turn on this interface.
Interface
Properties
Properties
Interface
Name
Select a name for the interface.
Zone
Select the zone to which you want the cellular interface to belong. The
zone determines the security settings the ZyWALL uses for the
interface.
zone determines the security settings the ZyWALL uses for the
interface.
Extension Slot
This is the PCMCIA or USB slot that you are configuring for use with a
3G card.
3G card.
Connected
Device
This displays the manufacturer and model name of your 3G card if you
inserted one in the ZyWALL. Otherwise, it displays none.
inserted one in the ZyWALL. Otherwise, it displays none.
Description
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
use alphanumeric and
()+/:=?!*#@$_%-
characters, and it can be
up to 60 characters long.
Connectivity
Nailed-Up
Select this if the connection should always be up. Clear this to have
the ZyWALL to establish the connection only when there is traffic. You
might not nail up the connection if there is little traffic through the
interface or if it costs money to keep the connection available.
the ZyWALL to establish the connection only when there is traffic. You
might not nail up the connection if there is little traffic through the
interface or if it costs money to keep the connection available.
Idle timeout
This value specifies the time in seconds (0~360) that elapses before
the ZyWALL automatically disconnects from the ISP’s server. Zero
disables the idle timeout.
the ZyWALL automatically disconnects from the ISP’s server. Zero
disables the idle timeout.
ISP Settings
Profile
Selection
Select Device to use one of the 3G device’s profiles of device
settings. Then select the profile (use Profile 1 unless your ISP
instructed you to do otherwise).
settings. Then select the profile (use Profile 1 unless your ISP
instructed you to do otherwise).
Select Custom to configure your device settings yourself.
APN
This field is read-only if you selected Device in the profile selection.
Select Custom in the profile selection to be able to manually input
the APN (Access Point Name) provided by your service provider. This
field applies with a GSM or HSDPA 3G card. Enter the APN from your
service provider. Connections with different APNs may provide
different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
Select Custom in the profile selection to be able to manually input
the APN (Access Point Name) provided by your service provider. This
field applies with a GSM or HSDPA 3G card. Enter the APN from your
service provider. Connections with different APNs may provide
different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 63 ASCII printable characters. Spaces are
allowed.
allowed.