ZyXEL Communications 1000 User Manual

 Chapter 22 IP/MAC Binding

ZyWALL USG 1000 User’s Guide

The following table describes the labels in this screen.  

Click Configuration > Network > IP/MAC Binding > Exempt List to open the 
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP 
addresses to which the ZyWALL does not apply IP/MAC binding. 

Figure 308   Configuration > Network > IP/MAC Binding > Exempt List 

The following table describes the labels in this screen.  

Table 104   Configuration > Network > IP/MAC Binding > Edit > Add 

Interface 
Name

This field displays the name of the interface within the ZyWALL and the 
interface’s IP address and subnet mask.

IP Address

Enter the IP address that the ZyWALL is to assign to a device with the 
entry’s MAC address.

MAC Address

Enter the MAC address of the device to which the ZyWALL assigns the 
entry’s IP address.

Description

Enter up to 64 printable ASCII characters to help identify the entry. For 
example, you may want to list the computer’s owner.

OK

Click OK to save your changes back to the ZyWALL.

Cancel

Click Cancel to exit this screen without saving.

Table 105   Configuration > Network > IP/MAC Binding > Exempt List 

Add

Click this to create a new entry.

Edit

Click an entry or select it and click Edit to modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms 
you want to remove it before doing so.

#

This is the index number of the IP/MAC binding list entry.

Name

Enter a name to help identify this entry.

Start IP

Enter the first IP address in a range of IP addresses for which the 
ZyWALL does not apply IP/MAC binding.