ZyXEL Communications 1000 User Manual

Chapter 50 System

ZyWALL USG 1000 User’s Guide

HTTP
Enable

Select the check box to allow or disallow the computer with the IP 
address that matches the IP address(es) in the Service Control 
table to access the ZyWALL Web Configurator using HTTP 
connections.

Server Port

You may change the server port number for a service if needed, 
however you must use the same port number in order to use that 
service to access the ZyWALL.

Admin/User 
Service Control

Admin Service Control specifies from which zones an administrator 
can use HTTP to manage the ZyWALL (using the Web Configurator). 
You can also specify the IP addresses from which the administrators 
can manage the ZyWALL. 

User Service Control specifies from which zones a user can use 
HTTP to log into the ZyWALL (to log into SSL VPN for example). You 
can also specify the IP addresses from which the users can access 
the ZyWALL. 

Add

Click this to create a new entry. Select an entry and click Add to 
create a new entry after the selected entry.

Edit

Double-click an entry or select it and click Edit to be able to modify 
the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The ZyWALL 
confirms you want to remove it before doing so. Note that 
subsequent entries move up by one when you take this action.

Move

To change an entry’s position in the numbered list, select the method 
and click Move to display a field to type a number for where you 
want to put it and press [ENTER] to move the rule to the number 
that you typed.

#

This is the index number of the service control rule.

The entry with a hyphen (-) instead of a number is the ZyWALL’s 
(non-configurable) default policy. The ZyWALL applies this to traffic 
that does not match any other configured rule. It is not an editable 
rule. To apply other behavior, configure a rule that traffic will match 
so the ZyWALL will not have to use the default policy.

Zone

This is the zone on the ZyWALL the user is allowed or denied to 
access.

Address

This is the object name of the IP address(es) with which the 
computer is allowed or denied to access.

Action

This displays whether the computer with the IP address specified 
above can access the ZyWALL zone(s) configured in the Zone field 
(Accept) or not (Deny).

Authentication
Client 
Authentication 
Method

Select a method the HTTPS or HTTP server uses to authenticate a 
client.

You must have configured the authentication methods in the Auth. 
method screen.

Table 232   Configuration > System > WWW > Service Control (continued)