ZyXEL Communications 128L User Manual

3.  ISP IP Addr - Enter the IP Address of the remote gateway at the 

ISP’s site. If you do not have this data, just leave it blank. 

4.  My Login Name - Enter the login name provided by your ISP. 

5.  My Password - Enter the password associated with the login name 

above. Note that this login name/password pair is only for your 
Prestige to connect to the ISP’s gateway. When you use TCP/IP 
applications, e.g., FTP, to access the Internet from your 
workstation, you will need a separate login name and password for 
each server. 

6.  Single User Account - See the following section for a more 

detailed discussion on the Single User Account feature. The default 
is No. 

7.  Press ENTER at the message: Press ENTER to Confirm ... to 

confirm your selections, or press ESC at any time to cancel your 
selections. 

8.  At this point, the SMT will ask if you wish to test the Internet 

connection. If you select Yes, your Prestige will call the ISP to test 
the Internet connection. If the test fails, note the error message that 
you receive and take the appropriate troubleshooting steps. 

Typically, if there are multiple users on the LAN wanting to concurrently 
access the Internet, they will have to subscribe to multiple IP addresses 
or a Class C subnetwork from the ISP. In either case, these two 
approaches will cost more than a single user account. 

The Single User Account (SUA) feature allows customers to have the 
same benefits as having a Class C address, but still only pay for one IP 
address, thus saving significantly on subscription fees. (Check with your 
ISP before you enable this feature).