ZyXEL Communications 128L User Manual

 

1.  Server Name  - In this field, enter in the name that has been 

configured for the server. This name must be the exact name 
configured in the NetWare server. 

2.  Network # - This field contains the internal network number of the 

remote server which you wish to access. Do not use 00000000 or 
FFFFFFFF for this field. 

3.  Node # - This field contains the address of the node on which the 

server resides. If you are using a Novell IPX implementation, this 
value is 000000000001. 

4.  Socket # - This field contains the socket number on which the 

server will receive service requests. The default for this field is hex 
0451. 

5.  Type # - This field identifies the type of service the server provides. 

The default for this field is hex 0004. 

6.  Gateway Node  - In this field, enter the number (1-4) of the 

Remote Node that is linked to this static route. That is, the Remote 
Node that you wish to route the packet to.