ZyXEL Communications 1123-AC User Manual
Chapter 6 Wireless LAN
NWA1000 Series User’s Guide
75
6.6.2 Security: WPA2, WPA2-MIX
This screen varies depending on the operating mode you select in the Wireless LAN > Wireless
Settings screen.
Settings screen.
6.6.2.1 Access Point
Use this screen to employ WPA2 as the security mode for your NWA that is in root AP, MBSSID or
repeater operating mode. Select WPA2 or WPA2-MIX in the Security Mode field to display the
following screen.
repeater operating mode. Select WPA2 or WPA2-MIX in the Security Mode field to display the
following screen.
Figure 31
Security: WPA2-MIX for Access Point
The following table describes the labels in this screen.
Key 1 to
Key 4
The WEP keys are used to encrypt data. Both the NWA and the wireless stations must use
the same WEP key for data transmission.
the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
("0-9", "A-F").
You can configure up to four keys, but only one key can be activated at any one time.
Back
Click Back to return to the previous screen.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 17
Security: WEP (continued)
LABEL
DESCRIPTION
Table 18
Security: WPA2-MIX for Access Point
LABEL
DESCRIPTION
Security Settings
Profile Name
This is the name that identifying this profile.
Security Mode
Choose WPA2 or WPA2-MIX in this field.
Rekey Options