ZyXEL Communications 2602HWL-D3A User Manual
Prestige 2602HWL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
130
Address
SIP Server
Port
Enter the SIP server’s listening port for SIP in this field. Leave this field set to
the default if your VoIP service provider did not give you a local port number
for SIP.
REGISTER
Server
Address
A SIP register server maintains a database of SIP identity-to-IP address (or
domain name) mapping. The register server checks your user name and
password when you register.
Enter the SIP register server’s address in this field.
If you were not given a register server address, then enter the address
from the SIP Server Address field again here.
REGISTER
Server Port
Enter the SIP register server’s listening port for SIP in this field.
If you were not given a register server port, then enter the port from the
SIP Server Port field again here.
SIP Service
Domain
A SIP service domain is the domain name that comes after the @ symbol in a
full SIP URI.
Enter the SIP service domain name in this field.You can use up to 127 ASCII
Extended set characters.
User Name This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. Use ASCII
characters.
Password
Type the password associated with the user name above. Use ASCII
Extended set characters.
Send Caller
ID
Select this check box to show identification information when you make VoIP
calls. Clear this check box to not show identification information when you
make VoIP calls.
Advanced
Setup
Click Advanced Setup to open a screen where you can configure the
Prestige’s advanced VoIP settings like SIP server settings, the RTP port
Prestige’s advanced VoIP settings like SIP server settings, the RTP port
range and the coding type.
Apply
Click Apply to save your changes back to the Prestige.
Reset
Click Reset to begin configuring this screen afresh.