ZyXEL Communications 2802HWL-IX User Manual

 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

97

With the account information your ITSP provider provided now you may start. 

Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP 

address of the Prestige (LAN IP address).   The default management IP of Prestige is 192.168.1.1.    

Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234' 

Step 3. On the left column click on VoIP to bring you to VoIP configuration menu than click on SIP. While in 

the SIP Settings page use the account selector on upper right of the page to select the SIP account you will like 

to configure.    

Step  4.  Check  active  sip  box  if  you  like  to  use  this  account  and  fill  in  the  account  information  the  ITSP 

provided  you  in  the  SIP  setting  category.   Which  will  normally  include  you  SIP  number,  SIP  local  port,  SIP 

server address, SIP server port, Register server port, Register server address, SIP service domain. 

Step 5. In the Authentication category fill in the User Name and authentication password your ITSP provided to 

you. 

Step 6. If you wish to send caller ID check the check box in the Caller ID category, if you do not wish to send 

out caller ID leave the check box uncheck. 

Step 7.   Click on Apply to save the setting and take effect.   If you would like to configure the 2nd SIP account, 

please select SIP2 by using the SIP account selector than follow step 1 to 8 to complete the 2nd account setup. 

Each field's detail description on this page is listed below.

 

You can configure the Prestige to use multiple SIP accounts. Select one to 

configure its settings on the Prestige. 

A SIP account's Uniform Resource Identifier (URI) identifies the SIP account 

in a way similar to the way an e-mail address identifies an e-mail account. It is 

also known as a SIP identity or address. The format of a SIP identity is 

SIP-Number@SIP-Srevice-Domain. 

A SIP number is the part of the SIP URI that comes before the "@" symbol. 

Enter your SIP number in this field. You can use up to 31 ASCII characters. 

Use this field to configure the Prestige’s listening port for SIP. Leave this field 

set to the default if you were not given a local port number for SIP.