ZyXEL Communications 2602R Series User Manual
Prestige 2602R Series Quick Start Guide
3
Do the following to make hardware connections for initial setup.
1 DSL: Connect the Prestige to a telephone jack using the included telephone wire.
2 LAN: Use an Ethernet cable to connect a computer or external hub to the LAN port for initial configuration
2 LAN: Use an Ethernet cable to connect a computer or external hub to the LAN port for initial configuration
and/or Internet access.
3 Phone 1-2: Connect one or more analog telephones to these ports using telephone wires. These are FXS
(Foreign Exchange Station) ports.
4 POWER: Use the included power adaptor to connect this power socket to an appropriate power source.
After you've made the connections, set the power switch to the "ON" side to turn on the Prestige.
The PWR/SYS LED flashes during system startup and stays on after the system self-tests are successful. The
LAN and DSL/PPP LEDs turn on if the LAN and DSL ports are properly connected (they flash when sending
or receiving data). See your User's Guide for detailed LED descriptions.
LAN and DSL/PPP LEDs turn on if the LAN and DSL ports are properly connected (they flash when sending
or receiving data). See your User's Guide for detailed LED descriptions.
2 Initial Configuration
You may configure the Prestige for Internet access in any one of these ways:
• Zero Configuration