ZyXEL Communications 1600 User Manual

5-6

I

Table 5-4 contains instructions on how to configure your Prestige 1600 for Internet access.

ISP's Name

Enter the name of your Internet Service Provider. (This
information is for identification purposes only.)

myISP

My Login
Name

Enter the login name assigned to you by your ISP.

(required)

My Password

Enter the password associated with the login name
above. Note that this login name/password pair is only for
your Prestige 1600 to connect to the ISP's gateway. For
TCP/IP applications, e.g., FTP, you will need a separate
login name and password for each server.

(required)

Network
Address
Translation

See the NAT Chapter for more details on this field and
Address Mapping Set below.

My WAN Addr Some implementations, especially the UNIX derivatives,

require the WAN link to have a separate IP network
number from the LAN and each end must have a unique
address within the WAN network number. If this is the
case, enter the IP address assigned to the WAN port of
your Prestige 1600.

Note that this is the address assigned to your local
Prestige 1600, not the remote router.

Address
Mapping Set

See the NAT Chapter

Edit Frame
Relay Options

Please see the WAN Port Setup chapter for a full
discussion of this feature.

Press [ENTER] at the message “Press ENTER to Confirm...” to confirm your configuration,
or press [ESC] at any time to cancel.

Menu 4 - Internet Access Setup

                    ISP's Name= ChangeMe
                    My Login= 1234
                    My Password= ********

                    Network Address Translation= SUA Only
                      My WAN Addr= 0.0.0.0
                      Address Mapping Set= N/A

                    Edit Frame Relay Options= No

                  Press ENTER to Confirm or ESC to Cancel: