ZyXEL Communications 2602HW Series User Manual

Prestige 2602HW Series User’s Guide

370

Chapter 37 Firmware and Configuration File Maintenance

to read about configurations that disallow TFTP and FTP 

over WAN.

Back up configuration via console port by following the HyperTerminal procedure shown 
next. Procedures using other serial communications programs should be similar.

1 Display menu 24.5 and enter “y” at the following screen.

Figure 221   System Maintenance: Backup Configuration

2 The following screen indicates that the Xmodem download has started.

Figure 222   System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the 

following screen.

Table 126   General Commands for GUI-based TFTP Clients

Host

Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address 

when shipped.

Send/Fetch

Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your 

computer. 

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom 

extension) on your computer.

Remote File This is the filename on the Prestige. The filename for the firmware is “ras” and for the 

configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.

Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):

You can enter ctrl-x to terminate operation any 
time.
Starting XMODEM download...