ZyXEL Communications 30W User Manual
ZyWALL 30W
9
Choose Ethernet when the WAN port
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
Step 3. Fill in the fields and click Finish to save and complete the wizard setup.
WAN IP Address Assignment
Select Get automatically from ISP if
your ISP did not assign you a fixed IP
address. Select Use fixed IP
address if the ISP assigned a fixed
IP address and then enter your IP
address and subnet mask in the next
two fields. Enter the gateway IP
address in this field (if provided)
when you select Use Fixed IP
Address.
Select Get automatically from ISP if
your ISP did not assign you a fixed IP
address. Select Use fixed IP
address if the ISP assigned a fixed
IP address and then enter your IP
address and subnet mask in the next
two fields. Enter the gateway IP
address in this field (if provided)
when you select Use Fixed IP
Address.
System DNS Servers
Select From ISP if your ISP
dynamically assigns DNS server
information (and the ZyWALL’s WAN
IP address). The field to the right
displays the (read-only) DNS server
IP address that the ISP assigns.
Select User-Defined if you have the
IP address of a DNS server. Enter
the DNS server's IP address in the
field to the right.
Select From ISP if your ISP
dynamically assigns DNS server
information (and the ZyWALL’s WAN
IP address). The field to the right
displays the (read-only) DNS server
IP address that the ISP assigns.
Select User-Defined if you have the
IP address of a DNS server. Enter
the DNS server's IP address in the
field to the right.
Select None if you do not want to configure DNS servers. If you do not configure a system DNS server, you must use IP
addresses when configuring VPN, DDNS and the time server.
WAN MAC Address
Select Factory Default to use the factory assigned default MAC address. Alternatively, select Spoof this Computer's MAC
address - IP Address and enter the IP address of the computer on the LAN whose MAC address you are cloning.
addresses when configuring VPN, DDNS and the time server.
WAN MAC Address
Select Factory Default to use the factory assigned default MAC address. Alternatively, select Spoof this Computer's MAC
address - IP Address and enter the IP address of the computer on the LAN whose MAC address you are cloning.