ZyXEL Communications 202H Plus User Manual
Prestige 202H Plus Quick Start Guide
24
Table 4 Adding/Editing Source and Destination Addresses
LABEL
DESCRIPTION
Address Type
Do you want your rule to apply to packets with a particular (single) IP address, a range of IP
addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box
addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box
Start IP Address
Enter the single IP address or the starting IP address in a range here.
End IP Address
Enter the ending IP address in a range here.
Subnet Mask
Enter the subnet mask here, if applicable.
6 Troubleshooting
PROBLEM CORRECTIVE
ACTION
None of the LEDs turn
on when you turn on
the Prestige.
on when you turn on
the Prestige.
Make sure that you have the correct power adaptor connected to the Prestige and plugged
in to an appropriate power source. Check all cable connections.
in to an appropriate power source. Check all cable connections.
If the LEDs still do not turn on, you may have a hardware problem. In this case, you should
contact your local vendor.
contact your local vendor.
Cannot access the
Prestige from the LAN.
Prestige from the LAN.
Check the cable connection between the Prestige and your computer or hub.
Ping the Prestige from a LAN computer. Make sure your computer Ethernet adapter is
installed and functioning properly.
installed and functioning properly.
Cannot ping any
computer on the LAN.
computer on the LAN.
If the LAN LEDs are all off, check the cable connections between the Prestige and your
LAN computers.
LAN computers.
Verify that the IP address, subnet mask of the Prestige and the LAN computers are in the
same subnet.
same subnet.
Cannot access the
Internet.
Internet.
Verify the Internet connection settings in the WAN screen.
The user name and password are case sensitive. Make sure you entered the correct user
name and password.
name and password.