ZyXEL Communications 200 Series User Manual
Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
149
2 Enter the name of the group that is used in
. In this example, it is
“Finance”. Then, select User/Leo and click the right arrow to move him to the Member
list. This example only has one member in this group, so click OK. Of course you could
add more members later.
list. This example only has one member in this group, so click OK. Of course you could
add more members later.
Figure 85 Object > User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.
6.5.3 How to Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for
the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to
use the authentication method. Finally, force users to log in to the ZyWALL before it routes
traffic for them.
the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to
use the authentication method. Finally, force users to log in to the ZyWALL before it routes
traffic for them.
1 Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and
click Apply.
Figure 86 Object > AAA Server > RADIUS > Default
2 Click Object > Auth. method. Click the Add icon.
3 Give the new authentication method object a descriptive name, and click the Add icon.
3 Give the new authentication method object a descriptive name, and click the Add icon.
Select group radius because the ZyWALL should use the specified RADIUS server for
authentication. Click OK.
authentication. Click OK.