ZyXEL Communications 200 Series User Manual

 Chapter 27 Application Patrol

ZyWALL USG 100/200 Series User’s Guide

Figure 367   AppPatrol > Other > Edit

The following table describes the labels in this screen.  

Table 142   AppPatrol > Other > Edit

Enable

Select this check box to turn on this policy.

Port

Use this field to specify a specific port number to which to apply this policy. Type 
zero, if this policy applies for every port number.

Schedule

Select a schedule that defines when the policy applies or select Create Object to 
configure a new one (see 

 for details). Otherwise, select 

any to make the policy always effective.

User

Select a user name or user group to which to apply the policy. Select Create 
Object to configure a new user account (see 

 for 

details). Select any to apply the policy for every user.

From

Select the source zone of the traffic to which this policy applies.

To

Select the destination zone of the traffic to which this policy applies.

Access

This field controls what the ZyWALL does with packets that match this policy. 
Choices are: 
forward - the ZyWALL routes the packets.
Drop - the ZyWALL does not route the packets and does not notify the client of its 
decision.
Reject - the ZyWALL does not route the packets and notifies the client of its 
decision.

Source

Select a source address or address group for whom this policy applies. Select 
Create Object to configure a new one. Select any if the policy is effective for every 
source.

Destination

Select a destination address or address group for whom this policy applies. Select 
Create Object to configure a new one. Select any if the policy is effective for every 
destination.

Protocol

Select the protocol for which this condition applies. Choices are: TCP and UDP. 
Select any to apply the policy to both TCP and UDP traffic.

Bandwidth 
Management

Configure these fields to set the amount of bandwidth the application can use. 
These fields only apply when Access is set to forward.