ZyXEL Communications 200 Series User Manual

 Chapter 44 File Manager

ZyWALL USG 100/200 Series User’s Guide

"

“exit” or “!'” must follow sub commands if it is to make the ZyWALL exit sub 
command mode.

Line 3 in the following example exits sub command mode.

Lines 1 and 3 in the following example are comments and line 4 exits sub command mode. 

Lines 1 and 2 are comments. Line 5 exits sub command mode. 

When you apply a configuration file or run a shell script, the ZyWALL processes the file line-
by-line. The ZyWALL checks the first line and applies the line if no errors are detected. Then 
it continues with the next line. If the ZyWALL finds an error, it stops applying the 
configuration file or shell script and generates a log. 

You can change the way a configuration file or shell script is applied. Include 

setenv stop-

on-error off 

in the configuration file or shell script. The ZyWALL ignores any errors in 

the configuration file or shell script and applies all of the valid commands. The ZyWALL still 
generates a log for any errors. 

Click Maintenance > File Manager > Configuration File to open the Configuration File 
screen. Use the Configuration File screen to store, run, and name configuration files. You can 
also download configuration files from the ZyWALL to your computer and upload 
configuration files from your computer to the ZyWALL.

interface dmz

ip address 192.168.5.1

!

!

interface dmz

# this is a note about the interface

!

! this is from Joe

# on 2008/02/26

interface dmz

ip address 192.168.5.1

!