ZyXEL Communications 2602HW User Manual
Prestige 2602HW Series Quick Start Guide
41
The following table describes the labels in this screen.
Table 8 Firewall: Edit Rule
LABEL
DESCRIPTION
Active
Select this option to enable this firewall rule.
Action for
Matched
Packet
Matched
Packet
Use the radio button to select whether to discard (Block) or allow the
passage of (Forward) packets that match this rule.
passage of (Forward) packets that match this rule.
Source/Destination Address
Address
Type
Type
Do you want your rule to apply to packets with a particular (single) IP, a
range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet
or any IP address? Select an option from the drop-down list box that
includes: Single Address, Range Address, Subnet Address and
Any Address.
range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet
or any IP address? Select an option from the drop-down list box that
includes: Single Address, Range Address, Subnet Address and
Any Address.
Start IP
Address
Address
Enter the single IP address or the starting IP address in a range here.
End IP
Address
Address
Enter the ending IP address in a range here.
Subnet Mask
Enter the subnet mask here, if applicable.
Add Click
Add to add a new address to the Source or Destination
Address box. You can add multiple addresses, ranges of addresses,
and/or subnets.
and/or subnets.
Edit
To edit an existing source or destination address, select it from the box
and click Edit.
and click Edit.
Delete
Highlight an existing source or destination address from the Source or
Destination Address box above and click Delete to remove it.
Destination Address box above and click Delete to remove it.
Services
Available/
Selected
Services
Selected
Services
Please see User’s Guide for more information on services available.
Highlight a service from the Available Services box on the left, then
click Add>> to add it to the Selected Services box on the right. To
remove a service, highlight it in the Selected Services box on the
right, then click Remove.
Highlight a service from the Available Services box on the left, then
click Add>> to add it to the Selected Services box on the right. To
remove a service, highlight it in the Selected Services box on the
right, then click Remove.
Available
Service
Service
Click the Available Services link to bring up the screen that you use to
configure a new custom service that is not in the predefined list of
services.
configure a new custom service that is not in the predefined list of
services.