3com 5000/6000 User Manual
76
3Com Router 5000/6000 Family
Command Reference
group
Use the
group
command to create a peer group.
BGP view
group-b
Use the
group-b
command to enable or disable Group-B stage signal to complete register exchange.
R2 CAS view
gts
Use the
gts
command to configure traffic shaping for a behavior.
Traffic Behavior view
gw-access-number
Use the
gw-access-number
command to configure the access service number or enter the view of the
access service number.
Voice Dial Program view
gw-address
Use the
gw-address
command to configure the source IP address used by the voice gateway.
Voice GK Client view
gw-id
Use the
gw-id
command to configure the gateway alias.
Use the command
gw-id
to configure the gateway alias, which is used for the gateway to register and
identify the voice gateway. Each gateway has only one alias, and the new alias will cover the old one.
Voice GK Client view
header
Use the
header
command to create a banner.
System view
help
Use the
help
command to get the help information for the specified or all SFTP client commands.
SFTP Client view
history-command max-size
Use the
history-command max-size
command to set the size of history command buffer.
User Interface view
history keep-time
Use the
history keep-time
command to configure the retaining time of the history record for a test group.
HWPing Test Group view
history-record
Use the
history-record enable
command to enable history record.
HWPing Test Group view
history-records
Use the
history-records
command to configure the number of test results that the system can retain.
HWPing Test Group view
home-agent ip-address
Use the
home-agent ip-address
command to configure the HA address of the MR.
MR view
hookoff-time
Use the
hookoff-time
command to configure the hangup timer. When this timer times out, the interface
hangs up.
FXO Voice Subscriber-Line view
host-route
Use the
host-route
command to control the RIP to accept the host route.
RIP view
hotkey
Use the
hotkey
command to assign a hot key to a command line.
System view
http-operation
Use the
http-operation
command to configure an HTTP operation type.
HWPing Test Group view