Anritsu 373XXA User Manual
8-7
A24 VME BUS
TERMINATOR PCB
TERMINATOR PCB
This paragraph provides instructions for removing and replacing the
A24 VME Bus Terminator PCB assembly.
A24 VME Bus Terminator PCB assembly.
Preliminary:
q Switch 373XXA power off. Remove the power cord.
q Remove bottom cover (paragraph 8-3).
q Remove bottom cover (paragraph 8-3).
Remove/Replace Procedure
Step 1.
Place the 373XXA on its top (bottom-side up).
Step 2.
Locate the A24 PCB assembly (Figure 8-5). Unplug A24
PCB assembly from the A17 Motherboard PCB by gently
pulling straight up on each side.
PCB assembly from the A17 Motherboard PCB by gently
pulling straight up on each side.
CAUTION
Be careful not bend or disturb the hard
co-ax lines located near right edge of A24
PCB.
co-ax lines located near right edge of A24
PCB.
8-8
FRONT PANEL
ASSEMBLY
ASSEMBLY
This paragraph provides instructions for removing and replacing the
373XXA Front Panel assembly.
373XXA Front Panel assembly.
A24 VME BUS TERMINATOR PCB
REMOVE AND REPLACE
8-12
373XXA MM
A24 VME Bus Terminal
PCB Assembly
A17 Motherboard
PCB Assembly
Figure 8-5.
Location of the A24 VME Bus Terminator PCB Assembly