Lantronix 900-598 User Manual

6: Network Settings

PremierWave XC User Guide

To Configure Network 2 Roam Settings

Using Web Manager



To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select
Network 2

→ Configuration → Roam

Using the CLI



To enter the Network 2 GSM/GPRS command level:
enable -> config -> if 2 ->link -> roam

Using XML



Include in your file: <configgroup name="roam">

Network 2 GSM/GPRS Bands Settings

The table below shows the settings for GSM/GPRS Bands settings.

Table 6-8 Network 2 (wwan0) GSM/GPRS Bands Settings

Network 2 (wwan0)
GSM/GPRS Settings

Description

GSM/GPRS Bands

Select the GSM/GPRS Bands if needed:



Auto (Default)



GSM-900



GSM-1800



GSM-850



GSM-1900

Note:

These bands are the wwan0 frequencies designated by the ITU for the

operation of GSM mobile phones. Typically Auto should suffice in most cases and
should not be changed unless the unit is unable to determine the specific band
used by your provider.

GSM bands 900 & 1800 are used in most parts of the world, with the exception of

places such as USA, Brazil and Canada where GSM bands 850 & 1900 are used.

Changes do not take effect until after reboot.

To Configure Network 2 GSM/GPRS bands Settings

Using Web Manager



To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select
Network 2

→ Configuration → GSM/GPRS Band

Using the CLI



To enter the Network 2 GSM/GPRS command level:
enable -> config -> if 2 ->link -> gsm gprs band